3 point hydraulic grader with good quality-manufacture,factory,supplier from China

This mounted land scraper is a farm implements that uses the scraper which fitted between the front and back rear wheels to unknit land, the scraper can be lifted, sloped, revolved and extended.this machine is  Flexible and accurate, easy to use; applicable for constructing the roadbed and road surface, ditching the side slope, mixing road mixtures, removing snow, transporting grain materials and maintaining the dirt roads and gravel roads, etc.

This land grader is a farm implements that uses the scraper to unknit land, this machine is  Flexible and accurate, easy to use; applicable for constructing the roadbed and road surface, ditching the side slope, mixing road mixtures, removing snow, transporting grain materials and maintaining the dirt roads and gravel roads, etc. the working width: 4-8inch ModelUnitBB-4BB-5BB-6BB-7BB-8Working   widthm12001500180021002400Total   weightkg180200230260300Matched   powerhp2030405060Linkage  Three-point suspension I type

LR tractor raker, a new implement manufactured by our company through the introduction of US technologies, is suitable for raking weeds on the uncultivated field surface and the shallow layer of cultivated land. The rake fingers, which are made of 65Mn steel through heat treatment, have the advantages of good elasticity, high strength and good abrasion resistance.ModelUnitLR-4LR-5LR-6LR-7working   widthFt/mm4/12005/15006/18007/2100total weightkg120130140150matched   powerhp25304050linkageThree-point   suspension I type

CY series carryall is the multifunctional transporting tool, which is Perfect for transporting water & diesel tanks,chainsaws, toolboxes, stock feed, small tanks, hay, hoses, generators and so on.

LR tractor raker, a new implement manufactured by our company through the introduction of US technologies, is suitable for raking weeds on the uncultivated field surface and the shallow layer of cultivated land. The rake fingers, which are made of 65Mn steel through heat treatment, have the advantages of good elasticity, high strength and good abrasion resistance.ModelUnitLR-4LR-5LR-6LR-7working   widthFt/mm4/12005/15006/18007/2100total weightkg120130140150matched   powerhp25304050linkageThree-point   suspension I type

LR tractor raker, a new implement manufactured by our company through the introduction of US technologies, is suitable for raking weeds on the uncultivated field surface and the shallow layer of cultivated land. The rake fingers, which are made of 65Mn steel through heat treatment, have the advantages of good elasticity, high strength and good abrasion resistance.ModelUnitLR-4LR-5LR-6LR-7working   widthFt/mm4/12005/15006/18007/2100total weightkg120130140150matched   powerhp25304050linkageThree-point   suspension I type

Model1LS-215Power12-18hp Hand tractorPloughing width (cm)40Ploughing depth (cm)12-18Quantity of disc2Net Weight40 KGS

Model 9G series of sickle bar mower takes advantage of the offset crank link mechanism to drive the cutter blade mow grass, and it is adequate for cutting the natural and planted grasses in ranch, mountain and hilly area. The structure of this machine is compact and the operation is easy and reliable and the residues is lower after cutting.Modelunit   9G-1.49G-1.69G-1.89G-2.1Working widthmm1400160018002100Working depthmm50-80PTO Rotation speedr/min540PTO shaft  spline6 splineTotal weightkg120124128135Matched powerhp12-2015-2020-3020-30LinkageThree-point suspension   I type

4U series of sweet potato harvester is mounted with the tractor of 12-60hp with back power and side power output shaft. Our tractor potato harvester is intended for potato excavation , tubers partial separation from the soil and tubers laying on field surface for their further picking up. A triangular beater is set on the potato harvester. The working principle of this potato digger is that the digging shovel digs up the soil and crops through the impetus of the tractor.

1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working widthmm90012001500105014001750Working depthmm220-270Number of bottoms68106810Total weightkg5807509506208001000Matched powerhp507080557590LinkageThree-point suspension II type ,hydraulic output(difunctional oil cylinder),oil connection in 1/2” thread

Product descriptions from the supplierOverview Farm disc harrow with small tractor 3-point disc harrows Product Description1BQX Series offset 3-point farm disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened a break the hardened soil and return the chopped straw to the soil, and also can crash the soil after tillage and level the land.It can be used as tillage machine instead of plow on the cultivated land.

this rear mounted rotary mower is the updated version from the type 9GX series.we add the chain in the front and rear of the tractor rotary slasher to protect the worker.

this rear mounted rotary mower is the updated version from the type 9GX series.we add the chain in the front and rear of the tractor rotary slasher to protect the worker.

3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating, ditching, riding, deep loosing, etc. The rotary cultivator can break the harden soil, loose soil, and keep the underground water of soil, and clean the stubble of crop. This cultivating machine  is rational structure. It is safe, durable, and high efficiency. Modelunit3Z-23Z-33Z-43Z-5Working widthmm1100190029003700Working depthmm100-200No.

Model 9G series of sickle bar mower takes advantage of the offset crank link mechanism to drive the cutter blade mow grass, and it is adequate for cutting the natural and planted grasses in ranch, mountain and hilly area. The structure of this machine is compact and the operation is easy and reliable and the residues is lower after cutting.Modelunit9G-1.49G-1.69G-1.89G-2.1Working widthmm1400160018002100Working depthmm50-80PTO Rotation speedr/min540PTO shaft  spline6 splineTotal weightkg120124128135Matched powerhp12-2015-2020-3020-30LinkageThree-point suspension   I type

4U series of sweet potato harvester is mounted with the tractor of 12-60hp with back power and side power output shaft. Our tractor potato harvester is intended for potato excavation , tubers partial separation from the soil and tubers laying on field surface for their further picking up. A triangular beater is set on the potato harvester. The working principle of this potato digger is that the digging shovel digs up the soil and crops through the impetus of the tractor.

Disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened soil and return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.It can be used as tillage machine instead of plow on the cultivated land. With the efficient productivity, reasonable utilization of the power, great ability of cutting and shattering the soil , the soil surface is smooth and loosening after harrowing, it is well suitable for heavy clay soil, waste land and weedy field as well.

This mounted land scraper is a farm implements that uses the scraper which fitted between the front and back rear wheels to unknit land, the scraper can be lifted, sloped, revolved and extended.this machine is  Flexible and accurate, easy to use; applicable for constructing the roadbed and road surface, ditching the side slope, mixing road mixtures, removing snow, transporting grain materials and maintaining the dirt roads and gravel roads, etc.

3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement.ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension   II type

3Z series of disc ridger is suitable for ridging after the tillage in the farm field. it consists of heavy duty tubular box frame, 3 point hitch system and discs.the disc blades are made after the heat treatment in the material of 65 Mn spring steel that has better hardness.

Model 9G series of sickle bar mower takes advantage of the offset crank link mechanism to drive the cutter blade mow grass, and it is adequate for cutting the natural and planted grasses in ranch, mountain and hilly area. The structure of this machine is compact and the operation is easy and reliable and the residues is lower after cutting.Modelunit  9G-1.49G-1.69G-1.89G-2.1Working widthmm1400160018002100Working depthmm50-80PTO Rotation speedr/min540PTO shaft  spline6 splineTotal weightkg120124128135Matched powerhp12-2015-2020-3020-30LinkageThree-point suspension   I type

CY series carryall is the multifunctional transporting tool, which is Perfect for transporting water & diesel tanks,chainsaws, toolboxes, stock feed, small tanks, hay, hoses, generators and so on.

1BZ series of Hydraulic offset heavy disc harrow is well suitable for heavy clay soil, waste land and weedy field as well ,mainly suitable for stubble cleaning before farming , it can break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.

Series of 9GX Mainly applicable for grassland, shrub land and field with rough surface. It Uses offset brace linkage machine to drive knife. Mainly applicable for farm land, field grassland, mountains, natural grazing and planted grazing. With reasonable structure; simple and reliable to use, etc. ModelUnit9GX-0.89GX-1.59GX-1.89GX-2.1Working widthmm800160018002100Working depthmm30-50PTO Rotation speedr/min540PTO shaft spline6 spline or 8 splineTotal weightkg220335440520Matched powerhp20-4040-6070-8090LinkageThree-point suspension